Refurbished / Demo Industrial Dry Vacuum Pumps
Turbo Pumps & Systems
New Turbo Pumps
New Turbo Pumping Stations
Refurbished / Demo Turbo Pumps
Rotary Vane Pumps
New Rotary Vane Pumps
Dry Vacuum Pumps
Vacuum Measurement
Vacuum Hardware
KF (NW) Components
CF Components
ISO Components
Leak Detectors & Mass Specs
Spare Parts
Rotary Vane Pumps
Vacuum Fluids / Greases
Traps Mist Filters
Laboratory Equipment
Liquid Handling
Bottletop Dispensers
Bottletop Dispensers Parts & Accesories
Edwards iQDP80 Dry Semiconductor Vacuum Pump
Edwards iQDP 80 Overview:
The iQ Drypumping System is a microprocessor controlled, modular, dry pump package that provides unparalleled control and monitoring facilities. The iQ pumping system can be locally controlled by a hand held LCD control panel or remotely controlled through a fully customized tool interface. All major control elements are located within the footprint of the pumping system.The iQ dry pumping system has integrated sensors, which continuously monitor key system performance parameters and give advanced warning of problems. These pumps have pump and motor temperature sensors installed.
The iQ pumpset parameters can be monitored and displayed through a variety of ouTPU t devices including: Hand-held or panel mounted control module; Local PC or laptop computer; OEM specified tool interface; PC as part of a fab-wide network. This is a hand held LCD control panel module provides access to: system control and configuration; system status and monitored values; diagnostics and recommended corrective action. A tool interface module can be used to provide a fully customized interface to your process tool. It communicates with the iQ pumping system through a screened twisted pair cable. It has integral system configuration which check process pump service history log, process/tool specific settings, updated on power-on, giving maximum pump interchangeability between process tools.
Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.
Edwards iQDP 80:
Click Here for Edwards iQDP 80 Manual
A&J Vacuum Services offers full repair/service of Pfeiffer Vacuum Pumps, along with all other brands offered on our website. AJVS also services Pfeiffer turbo pumps and rotary vane pumps. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.
Edwards iQDP80 Dry Semiconductor Vacuum Pump
Edwards iQDP 80 Technical Data:
Click Here for Edwards iQDP 80 Manual
A&J Vacuum Services offers full repair/service of Pfeiffer Vacuum Pumps, along with all other brands offered on our website. AJVS also services Pfeiffer turbo pumps and rotary vane pumps. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.
|
Service and Repair - Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
Overview
Edwards iQDP80 Dry Semiconductor Vacuum Pump
Edwards iQDP 80 Overview:
The iQ Drypumping System is a microprocessor controlled, modular, dry pump package that provides unparalleled control and monitoring facilities. The iQ pumping system can be locally controlled by a hand held LCD control panel or remotely controlled through a fully customized tool interface. All major control elements are located within the footprint of the pumping system.The iQ dry pumping system has integrated sensors, which continuously monitor key system performance parameters and give advanced warning of problems. These pumps have pump and motor temperature sensors installed.
The iQ pumpset parameters can be monitored and displayed through a variety of ouTPU t devices including: Hand-held or panel mounted control module; Local PC or laptop computer; OEM specified tool interface; PC as part of a fab-wide network. This is a hand held LCD control panel module provides access to: system control and configuration; system status and monitored values; diagnostics and recommended corrective action. A tool interface module can be used to provide a fully customized interface to your process tool. It communicates with the iQ pumping system through a screened twisted pair cable. It has integral system configuration which check process pump service history log, process/tool specific settings, updated on power-on, giving maximum pump interchangeability between process tools.
Every dry vacuum pump we sell goes through a rigorous rebuild process at our Albuquerque, New Mexico (NM) location. Each pump is fully dismantled and all parts are decontaminated and inspected. Damaged or worn parts are replaced. All bearings, o-rings, seals, and gaskets are replaced. Rebuilt pumps are attached to our computer controlled pressure diagnostics system where their performance is monitored for 72-hours under varying load. Pumps are leak tested to ensure safety during operation. Final pump is cleaned and painted as required.
Edwards iQDP 80:
Click Here for Edwards iQDP 80 Manual
A&J Vacuum Services offers full repair/service of Pfeiffer Vacuum Pumps, along with all other brands offered on our website. AJVS also services Pfeiffer turbo pumps and rotary vane pumps. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.
Specifications
Edwards iQDP80 Dry Semiconductor Vacuum Pump
Edwards iQDP 80 Technical Data:
Click Here for Edwards iQDP 80 Manual
A&J Vacuum Services offers full repair/service of Pfeiffer Vacuum Pumps, along with all other brands offered on our website. AJVS also services Pfeiffer turbo pumps and rotary vane pumps. Please contact us for information about our service and repair program or click http://www.ajvs.com/service.php to access our services page. We also offer emergency service upon request. For more information, please email A&J Vacuum Services at info@ajvs.com or call (973) 249-0854. Thank you for choosing AJVS as your supplier.
Service & Repair
- Turbo Pumps
- Rotary Vane Pumps
- Dry Vacuum Pumps
- Leak Detectors
- Scroll Dry Pumps
- Vacuum Boosters
- Diaphragm Dry Pumps
A & J Vacuum Services provides repair service for all types of High Vacuum equipment. We perform Turbomolecular Pump repair, Turbo Pump Repair, Dry Pump repair, Vacuum Pump repair, Mass Spectrometer repair, Rotary Vane Pump repair, Vacuum Booster repair, and Leak detector repair. Our highly trained technicians have years of experience and guarantee the highest quality service.
We operate at our own full service repair facility in Clifton, NJ. We have invested in state-of-the-art equipment including; complete line of decontamination, cleaning, drying, balancing, vibration analysis and software to minimize failures. Our in-house machine shop is capable of machining various components, prototypes and housing conversions as needed.
We support all major manufacturers including Pfeiffer Vacuum, Alcatel / Adixen, Edwards Vacuum, Varian, Oerlikon / Leybod Vacuum, Vacuubrand, and Agilent Technologies.
Repair Steps
- Full incoming inspection and run up time check, vibration check, drive inspection.
- Full disassembly, decontamination and cleaning.
- Pump is balanced utilizing state-of-the-art equipment from the world leader in equipment balancing and analysis to reduce noise and vibrations and extend bearings life.
- Assembly and replacement of all necessary parts such as shafts, bushings, bearings, sleeves, O-rings, gaskets, seals, wicks, etc. Only parts that meet or surpass OEM specifications are used to ensure dependable highest quality service and long pump life.
- Final test and leak check. The pump in fully assembled condition is checked for vacuum seal. Leak test to 1 x 10-9 Mbar l/s. Vibrations are analyzed and test data is digitally recorded.
Every pump and instrument is extensively tested for 48 hours. During our final tests, we monitor total pressure, temperature, vibration and noise level utilizing newest testing technologies and techniques specified by OEM. Upon request, we can provide our customers with a pump down graph. Call us for your free repair estimate at 1-973-249-0854.
